GV-GF1911 GV-GF Fingerprint Reader works with GV-AS / GV-EV Controller and GV-ASManager

• Work with GV-AS / GV-EV Controller and GV-ASManager


• Three types of access modes: card only, fingerprint only and card plus fingerprint


• Fingerprint templates stored on the user card


• Three types of communication interfaces for connecting with GV-AS Controller: Wiegand 26, RS-485 and TCP/IP (LAN)


• GV-GF1911: Enroll fingerprints through RS-485 connection with GV-ASManager (Fingerprint Only Mode)


• Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security

Note:

• RS485 and TCP/IP interfaces only support GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26 Bits).


• For Card + Fingerprint Mode and Card Only Mode, it is required to purchase GeoVision GV-AS ID Card / Key Fob & GV-UHF Tag to work with. 


• Data synchronization with GV-AS Controller and GV-ASManager through LAN is only supported


• when the following controller firmware version and software version work together: 
  * GV-AS100 / 110 / 120: V1.06 or later
  * GV-AS400: V1.04 or later
  * GV-AS210 / 810: V1.0 or later
  * GV-AS410: V1.1 or later
  * GV-AS2110 / 4110 / 8110: V1.23 or later


• Specifications are subject to change without notice.